用软件对松下KX-TDA100电话交换机进行维修编程，第一步如何进系统

使用软件对松下KX-TDA100进行编程，你必须要已经有这款软件才可以的，目前基本上是可以从网络上下载到这款软件，但是你要学会怎么样进到编程才可以对数据进行修改的，初始密码是1234，很少修改，如果修改了，就比较麻烦一点了；

我们这里是按照没有修改时的操作步骤来的；1234

复制INSTALLER，以安装人员身份登陆；

点击OK后，会出现登陆框，然后输入刚才复制的内容，点击登陆。

此时就已经进入到软件编程界面了。

你的数据线，必须连接到PBX，才可以进行接下来的步骤。

Information before programming
===================================================================
<< Default Programmer Code (saved in PC) >>
Installer level : INSTALLER
Administrator level : ADMIN
User level : USER

<< Default Password (saved in PBX) >>
Installer level : 1234
Administrator level : 1234
User level : 1234
Changing password from default is strongly recommended to prevent unexpected access..

<< Notice >>
// Updating from MPR V3.0 to MPR V3.2 //
When updating from MPR V3.0 to MPR V3.2, the new PMPR software file and DINI files must be transferred to the SD card.
However, it is not necessary to convert the DSYS file or perform default clear.
*) If the DINI file is not updated to MPR V3.2, the PCMC for MPR V3.2 cannot be activated.

// COLP //
COLP for ISDN ports is disabled by default from MPR software version 3.xxxx, to prevent problems when using ISDN lines that do not support COLP service.

// Private network to public trunk access //
Private network to public trunk access is disabled by default from MPR software version 3.xxxx, to prevent unexpected access.
The default class of service (COS)/TRS of trunk groups is level 7.

===================================================================
===================================================================